With a beixo you can dismantle the rear wheel in no time. The (dis) assembly is very simple and much easier than with a chain bike. After all, you don’t have to remove the chain and tension it again. Let alone that fuss arises with a chain guard.

How does it work?

Loosen the two screws on the dust cover, loosen the wheel nuts, release the brake and the wheel can be removed. Since everything can only fit in one way, replacing it is also child’s play. What is important is that the parts are replaced in the same way. Pay special attention to the order of the rings on the right-hand side before removing the wheel from the bicycle. To maintain a smooth and silent drive, they must be mounted in exactly the same way.

Tip: first tighten the wheel nut on the side of the cardan shaft, this will center the wheel. Only then the wheel nut on the left side of the bike.

View all questions